Is your PC is appearing with the Black screen, or a never-ending rotating circle when you try to boot up? If so, then no need to worry as we will focus on reviving your PC if you are suffering from black screen errors, or if you cannot log in, or get stuck in a reboot loop. Well, fixing a computer with a black screen problem seems to be difficult but not hard to resolve this issue.
Problems like losing cords are easy to fix but other problems like black screens on laptops or PCs may require an expert technician. Whatever the problem is you can fix this issue easily by reading the following given steps.
Getting a blue screen of death might be bad with it your computer will tell you that there is something wrong. But if you end up with a black screen problem then you usually won’t get to know what the problem is.
Why does Black screen error appear in Windows 10?
When the user experienced that their device encounters a black screen problem then they should know at least two things. First, they should know that there is something wrong with the PC. And secondly, because nothing is visible they can guess that in the computer’s graphic system there must have been an error.
As such, various issues can cause the black screen of death. In this article, you will be guided by some best solutions for resolving the black screen problem.
1: In-completion of Windows 10 installation.
2: Windows didn’t get updated well.
3: Software as well as driver errors.
4: Display issues.
5: Overheating problem.
6: Power supply problem.
All the above issues can lead to a black screen problem in Windows 10. However, it has become easy to fix this problem now. Read the following given troubleshooting steps and implement them in the same way as it has been explained to you.
How to Fix Windows 10 Black Screen Problem?
Black screen of death is usually caused by a software glitch but it can be reproduced and repaired again. This problem seems more serious than hardware problems. So, it will require component repair or replacement.
If your Windows 10 Pc reboots to a black screen problem, then you just need to press Ctrl+ Alt +Del on your Keyboard. Now, click the power button at the bottom-right corner of your screen and then select Restart to restart your PC.
A Black screen might happen for various reasons. It can be related to an issue with a graphics driver update, or it could get occur during the installation of a feature update that evolves the compatibility problem. It could also get happen due to a buggy system update, or can be a hardware related issue with the display or connection. Whatever, the reason will be there are several ways to determine the cause and resolve this problem on windows 10.
In this guide, we will walk through the instructions or methods to troubleshoot and fix black screen problem:
Solution 1st: Check all connections and cable to Fix Black Screen Problem:
If everything works normally and suddenly your PC won’t show a screen then there are chances of something went wrong with the cables or your monitor. Here is how you can check all your important connections.
Unplug and Reconnect your video cables: Firstly, you need to try disconnecting and then reconnecting your video cables. Whether it is an HDMI, DVI, Display port you need to check it occasionally that is they are free from dust or crud.
- Try a different cable:
Cable breaks sometimes and especially when you are using a laptop or an external monitor. While constantly plugging in connectors wear them out over time. To check whether your cable is affected, then you need to try a different video cable that you get assured that it can works. But if it also produces an image then it’s time to buy a new cable for your computer.
Solution 2nd: Restart Graphics Driver:
1: First, you need to press Win + Ctrl+ Shift+ B combination to restart your PC’s graphics driver. This may help in fixing some problems.
2: Now, forcibly you can shut down your PC but remember this will lose all your work. To do this step you need to press and hold your Pc’s physical power button until it shuts down. Then wait for few seconds and then press the power button to turn it back on.
3: You need to make sure that both your keyboard and mouse are connected well to your PC and have battery power. Your PC might show a black screen error if it turns down the display for power-saving mode.
Solution 3- Force Your Display to Wake Up:
Nothing makes you irritating when your device would refuse to start and show a black screen after ending the sleep mode. Thus, it could occur to any of the following reasons:
1: First, if you recently updated your Windows OS on the system.
2: Second, when you have installed a problematic file into the storage of the device that contains malware or viruses.
Despite the reasons above, you could easily fix the black screen issue to enable the sleep mode on the PC. Here has been defined one critical solution to fixing your display to wake up.
It happens sometimes that a new update could cause malfunctioning or viruses to your device. Also, it could be a mess with the sleep-mode too and some other similar issues of the Windows operating system. Therefore, it is vital to disable the function of the black screen issue.
Look at the steps below how to Force Your Display to Wake Up:
1: Firstly, you need to Right-click on the battery icon that is next to the taskbar.
2: Now, click on Power options and you will see a new window on your computer screen.
3: On the left, side of the screen you need to click on Choose what the power buttons do and then proceed further.
4: Now, under the shut-down setting section, uncheck all the following utilities:
- Turn on Fast startup is recommended.
- Sleep
- Hibernate
- Lock
5: Next, click on Save Changes once you have initiated the new settings.
Solution 4th– Reset Default Setting:
Both the hardware and driver issues result in a Black Screen of death and it can be only repaired via safe mode. If your computer is hanged with a black screen, then you need to restart the computer and hold F8 or Shift and F8. Therefore, it should boot the computer into safe mode.
Also, if you are unable to reach safe mode then you need to try turning the computer off and then back it on again. On the third attempt, you will see that your computer system will automatically boot into the Safe mode.
Here is how to perform these following steps:
1: With the safe mode running, first you need to click the Advanced options button and then Troubleshoot>Advanced options>Startup setting>Restart.
2: Here in the subsequent screen, you need to enable Safe mode then wait for windows safe mode to start.
3: Once your device gets booted, then press Windows +X to open the quick link menu and then select Device Manager.
4: Here you need to expand Display adapters and then right-click on the device and select Disable.
5: Finally, you can restart the computer to resume the installation of Windows 10. If runs successfully then you can run windows update to download the latest device drivers and it resolves the Black Screen of death issue.
Solution 5th – Boot into Safe Mode:
Safe mode is your operating system diagnostic mode. When your computer remains in safe mode then only essential programs will run which means you cannot access third-party software or drivers. This could help you in fixing the problems with your operating system.
If you are having problems while signing in to your computer, then you can boot your device in safe mode. Here are some of the steps below:
1: First, you need to press your computer’s power button to turn your PC on.
2: While windows are starting then you need to hold down the power button for at least 4 seconds. Moreover, it is also important that you should wait until you see a progress bar.
3: Now, repeat this process of turning your computer on and off with the power button 3 times.
4: Finally, your computer gets restarted and it will boot into automatic repair and you might be asked to select your account and enter your password.
5: Still, if your computer has a problem, then you need to click on advanced options:
- First, you need to select Troubleshoot>Advanced options>Startup Settings>Restart.
- Secondly, you need to press the F4 key to see the startup settings screen.
Solution 6th : Use BIOS/UEFI:
It usually requires a core program to run your PC in its BIOS (Basic Input-Output System) or UEFI (Unified Extensible Firmware Interface). BIOS regulates basic hardware configuration. So, if you are getting a black screen, then you need to try to revert to default settings. Here is how you can perform this step.
While booting you will see a message that asks you to hit a certain key to enter setup. Most of the time it will be either F2 or the DEL Key so, you need to hit the keys repeatedly right after pressing the power button.
Now, you need to try the following two given steps:
Reset to Default settings:
- Firstly, you need to try to find an entry that is optimized defaults. Both BIOS/UEFI look different but the general wording is similar. Also, it will reset everything back to default settings in case something went wrong.
- Make sure that your PC boots from its hard disk:
- BIOS/UEFI helps in controlling the medium where the PC gets starts. It could be a hard-disk, CD, DVD, or even a floppy drive. But you need to make sure that this is set to your hard disk and you will mainly find it under Boot Priority or First Boot device.
Solution 7th: Unplug Unnecessary Device:
1: For fixing the Black screen Problem you need to disconnect all the unnecessary and non-essential connected devices and cable from both the PC and Laptop.
2: You need to press and hold the power button for at least 10 seconds to force shut down the system and then again turn on the system.
Note: Sometimes sudden power outrages a force shutdown and closes all the running tasks and thus any unsaved documents can get permanently lost. To overcome this issue you can use data recovery software immediately after the restart.
Solution 8th: Restart Explorer.exe:
Here has been defined some of the following given steps to restart explorer.exe:
1: First, you need to use Ctrl + Shift+ Esc keyboard shortcut to open task manager.
2: Now, click on the more details button.
3: Next, you need to click the processes tab.
4: Select the windows explorer service.
5: Finally, you need to click the Restart button from the bottom-right corner.
Solution 9th: Roll Back to Earlier Release of your Windows:
Is your computer is working correctly and normally before the Windows 10 update? If so, then windows may be showing a black screen because the graphics driver has been corrupted or may be incompatible with Windows 10. Most of the device driver like network adapters, monitors, printers gets automatically downloaded and installed when you update the newest windows 10. Therefore, you need to roll it back to its previous version.
Here has been listed some of the following steps of how to perform it:
1: Firstly, you need to boost your computer device into safe mode.
2: Now, open Device Manager by typing device manager in the search box.
3: Next, you need to expand Display adapters and then right-click the item under this branch.
4: Select properties in the context menu.
5: Then click on the driver tab.
6: Finally you need to select Rollback Driver and then choose Ok.
Solution 10th: Perform Windows 10, Clean Boot:
While booting into safe mode can help in troubleshooting random black screens that encounter during Windows 10 install. To get into the safe mode, you need to do the following steps:
1: First, you need to turn your computer on and off three times. While booting you need to make sure that you turn off the computer when you see the windows logo. And after the third attempt, Windows 10 will automatically boot into diagnostics mode. Thus, you need to click advanced options when the recovery screen appears.
2: Now, click Troubleshoot.
3: Click Advanced options.
4: Click Startup settings.
5: Now, click Restart.
6: Next sign –in and press Windows Key + X and then click Device Manager.
7: Expand Display Adapter and then right-click the display driver and then click Disable.
8: Restart your computer to see if the setup gets completed or you can boot to the desktop.
Solution 11th: Try Windows key sequence to wake the screen:
Using this method, users can be enabled to refresh their computer screen. It will also detect any issue with the display adapter and fix it immediately. Follow the given instructions carefully to perform the solution:
1: When you see the black screen on your computer then do not try to restart it.
2: You need to press the Windows key +Ctrl + Shift +B al-together.
3: Once you do it, you will hear a sound, and the screen will start to dim down.
4: Finally, you will be able to see the desktop again in no time.
Solution 12th: Un-install third party windows software:
Once you start updating Windows 10 then the third-party apps might malfunction and struggle to adapt to the new settings. This malfunctioning could result in the screen turning black. So, you would have to re-access the safe mode to perform the activity.
1: Under the safe mode you need to open the Task Manager from the start menu.
2: Now, under the menu-bar, you need to click on File and click on Run New Task.
3: Next, you need to enter “services.msc” on the dialogue box and then proceed.
4: Double-click on App Readiness and then you will see a new pop-up box.
5: Click on the “Start-up type” option and from the drop-down menu you need to click on Disabled before preceding further.
6: Click Ok to save the new settings and then restart your PC.
Frequently Asked Question (FAQ’s)
Q1: How to fix a computer that turns on but has no display?
Ans: Here has been defined some of the following steps that shows how to fix a computer that turns on but has no display:
1: First, check if your monitor is turned on.
2: Now, reconnect your monitor to your computer.
3: Next, reconnect your monitor to your computer.
4: Disconnect all peripherals.
5: Re-install your RAM.
6: Now, you need to reset your BIOS settings to default.
Tip: Update your device drivers.
Q2: How to start Windows 10 into a safe mode?
Ans: To start Windows 10 into safe mode look at the following given steps:
1: First, you need to click the Windows power button.
2: Now, you need to hold the shift key and then click Restart.
3: Click the option Troubleshoot and then click advanced options.
4: Go to advanced options and then click start-up settings.
5: Under Start-up settings, you need to click Restart.
6: Here various boot options get displayed.
7: Finally, windows 10 are in Safe mode.
Q3: How to fix no Display?
Ans: Here has been defined the steps to fix no display:
1: First, you need to test your monitor.
2: Now, make sure that your computer has completely get restarted.
3: Next, verify that the power supply voltage switch is set correctly.
4: Perform a hard reset.
5: Clear the BIOS memory.
6: Reset the memory modules.
7: Understand LED lights.
8: Check Hardware.
Q4: How to get rid of the Black screen problem?
Ans: To get rid of the Black screen problem try these following given steps:
1: First, you need to check your hardware and cable connection to your PC.
2: Now, update the Display/Graphics/Video Driver to fix the black screen issue on Windows 10.
3: Remove programs or update to solve the Black screen after Windows 10 update.
4: Disable fast startup.
5: Remove security software.
6: Create a new Microsoft account.
Q5: How to repair Windows 10?
Ans: To repair Windows 10 perform the following steps:
1: First, you need to navigate to the Windows 10 Advanced startup options menu.
2: Click Startup Repair.
3: Next, you need to click on System restore.
4: Select your username.
5: Finally, you can select a restore point from the menu and follow the prompts.
Final words
We hope that this guide has helped you in fixing Black screen issues. However, if all gets fail then you probably need to re-install Windows from scratch. This issue seems more serious or even beyond fixing. Thus, it is advisable to keep your system fresh and maintain it every week and it also helps in preventing the issues like the black screen problem.
In this article, we had firmly discussed every possible method that helps in fixing the black screen problem that usually occurs after a Windows 10 update. It is essential to take care of your computer and keeps continuously checking for warning signals. These signals eventually result in hardware failure and could end with showing a black screen. However, if any of the above solutions cause data loss on your PC then you has the full power to get it back within few minutes.
If you have gone through all the troubleshooting steps mentioned above and your computer is still displaying a black screen then your next step is to recover files from your hard drive before the issue crashes your hard drive and files.
Windows 10 Black screen issues can be persistent as well as mysterious. So, if you have gone through all of the troubleshooting steps and you still have issues then you can contact our experienced technician via chat. We will surely help you in fixing this problem by providing hassle-free solutions. So let us know about your successes, failures, and frustrations in dealing with this problem.
Leave a Reply